Jun 11, 2020 · Solved: Hi network gurus, I have a hard time to determine which part cable is broken at below. Do both short and open mean that we have cable issue from patch panel to the Ethernet port on the wall (the cable run inside the wall/ceiling), and the

Mar 22, 2023 · Hi We have ordered some 9200Cx, but it seems that we need a micro USB to get to the console. Not the standard mini USB type B, but the mobile phone type USB Micro Type B. A standard USB Micro Type B, doesn't work, even with the Cisco USB Driver, not serial port appears under the Ports (Com & LPT) l...

Jun 25, 2020 · Cisco switch hardware installation guides have a section on how to connect stack cables. The diagram below is the classic example, taken from the 9300 guide. The guides say this is a recommended configuration, not the recommended configuration To me, this method has the drawback that you must h...

Nov 4, 2019 · Check that the Cisco Serial (Comx) is using the correct driver provider which should be Cisco. Don't use the Cypress driver. To update the driver, 1. If you installed it already and having issues, uninstall it using the setup(x64),exe then reboot PC. 2. First, disconnect the blue Cisco USB console cable.

Aug 7, 2013 · Works on 29xx, 37xx, 45xx & 65xx series model switches Checking the Cable Status Using the TDR You can check the status of copper cables using the time domain reflectometer (TDR). The TDR detects a cable fault by sending a signal through the cable and reading the signal that is reflected back to it...

Sep 20, 2016 · My cisco driver com3 port stopped working on windows 10, so I uninstalled the cisco driver. After I rebooted, and reconnected the usb console cable, the native windows usb-serial driver loaded, and a new com3 port appeared. That port works just fine with securecrt with standard 9600 baud settings, so I guess we don't need the cisco driver. fwiw.

Jul 30, 2024 · I found the Cisco_usbconsole_driver_3_1.zip. But after I installed it, in Device Manager, under Ports (COM ...

Feb 3, 2014 · Hello! I would like to know if there's some situation what a console port could be disabled, or something like that. I'm trying to configure a Catalyst 2960 Series PoE-24 by the console port using the hyperterminal, but it's not working. I verified the cable and the COM port, and everything works w...

Mar 28, 2023 · My new Lenovo P1 laptop with Windows 11 was not able to communicate via the blue Cisco USB console cable to my IR1101 router serial port. My previous Lenovo X1 laptop running Windows 10 worked fine with the same cable and the same router. Solution: I installed the latest Silicon Labs CP210x Universal Windows driver v 11.2 to my Windows 11 ...

Jan 19, 2022 · Hi, I bought two refurbished 2911 routers for a home lab. When I boot them up, they both have solid green lights under "SYS" and "PS". I have a console to USB cable and use putty to access the routers. I plug the console cable into the router and the USB into my PC. The PC does not show any extra ...