Feb 27, 2010 · The 9,3x72R is comparable to the .38-55 but has a higher case volume. Lyman 48th says with a 249gr #2 Alloy Lyman #375248 boolit you will have 17000 CUP in the .38-55 with 31 grains of IMR3031. Given the higher case volume of the 9,3 and depending on your boolit weight that would be the hottest I would go (comparing it to the ffg load of my ...

Oct 21, 2021 · Sellier & Bellot sells factory ammo, with a 195 grain bullet, but I want too shoot cast bullets in my drilling. Another issue is actually utilizing the loading dies I have at my disposal, where are 9.3X57. Even with the expander right out of the die, the 9.3X72R brass barely grabs the 270 grain Speer bullets I am working with . The leads me

Mar 29, 2017 · The 9.3x72R is a rimmed cartridge (for break-open firearms) that uses .364"/.366" boolits. Commercial Sellier & Bellot ammunition is readily available online, as are loading dies/etc - just google "9.3x72R cartridge" to find out all you need to know.

Feb 21, 2016 · The 9.3x72r was a common combination gun caliber with 30/30 (more or less) capability. It has survived well into the nitro era and is still factory loaded with smokeless powder at Low pressure. I have a hammer drilling that has killed at least one deer since I have owned it.

Feb 27, 2010 · 8,7x72 Bore diameter, following old proof law of 1891 the caliber is 9.3x72R First proof shot with 7.5 gram powder and 22.9 gram bullet Second proof shot with 5.0 gram powder and 22.9 gram bullet Last proof shot/Normal loading 2.5 gram powder and 17.2 gram bullet 16 in circle caliber of shotgun barrels the actual caliber is 16/65 Full chokes

Sep 9, 2018 · I'm not thinking that the 9.3X72R was loaded with PP boolits originally but using the .358" boolits is easy as can be and may even smooth out your bore if it is a little frosty. Yeah PP is on my list of workable ideas.

Sep 2, 2018 · Just bought a pre-WW1 drilling & the rifle is chambered in 9.3x72R. It’s proofed as “Nitro for BP” so I was going to use Blackthorn 209 for powder. Anyone have any recommendation for loads? This is the 9.3 that uses a 193gr .366 bullet. Thanks!

Sep 19, 2018 · The 9.3x57R is a shorter version of the 9.3x72R the longer case can be trimmed down to 57mm and be resized an reloaded as 9.3x57R. If the 9.3x72R fits the chamber it is most likely that the 9.3x57R chamber has been reamed to accept the more common 9.3x72R.

Jan 27, 2009 · How heavy a bullet will a 9.3x72R stabilize? The Lyman 366408 mold weighs about 250 gr. I have 2 drillings in this caliber and both have a twist of 1-19. That seems a little slow for 250 grs. The little information I can find on the 9.3x72R has most of the bullets at about 200 gr. Both guns shoot 2.5” at 50 yards, but open up to 12” at 100 ...

Oct 21, 2021 · Groove diam is .355, regular 9.3x72R brass chambers but NOT with a 9.3 bullet. Chambers properly with .358 bullet, but my short 200 gr. bullets barely sit in the neck when engaging the rifling. End of chamber shows a very tapered …