The 5E-FHE is essentially a beefed up 1st gen 5E-FE. It boasts a higher compression ratio, more agressive cams (higher lift/duration), a factory 4-2-1 exhaust manifold, and a harmonic damper was added to deal with the rev limiter because it was increased to 7200 rpm.

The 5E is a 1.5 L (1,497 cc) DOHC 16-valve version. Output ranges from 94 PS (69 kW; 93 hp) at 5,400 rpm to 110 PS (81 kW; 108 hp) at 6,400 rpm with 91 lb⋅ft (123 N⋅m) of torque at 3,200 rpm to 100 lb⋅ft (136 N⋅m) of torque at 4,000 rpm.

The 1.5-liter Toyota 5E-FHE gasoline engine was produced in Japan from 1990 to 1999 and was installed in many of the company’s popular compact models such as the Cynos, Tercel and Sera. This motor is distinguished from the 5E-FE by evil camshafts and …

Apr 27, 2006 · Easiest, cheapest and most common swap because it's direct bolt-on. The toughest thing on this is the wiring. The hybrid uses the 5E-FHE crank block, head, rods, timing belt, belt gears, intake manifold, seals, bearings, flywheel and clutch with 4E-FTE pistons, oil sump, and oil pan.

Mar 27, 2025 · The 5E-FHE engine is a notable member of Toyota’s E series, specifically designed to deliver a balanced mix of performance and efficiency. This 1.5-liter inline-four engine is a testament to Toyota’s engineering prowess, offering a compact design that fits seamlessly into a variety of vehicles.

Mar 28, 2025 · The Toyota 5E-FE is a 1.5 L (1,497 cc, 91.35 cu·in) straight-four 4-stroke natural aspirated gasoline engine from Toyota E-family. The Toyota 5E-FE engine was manufactured from 1990 to 1998. The 5E-FE engine used a cast-iron block and aluminum cylinder head with dual overhead camshafts (DOHC) and four valves per cylinder (16 in total).

Jul 2, 2010 · 5E-FHE cams: Intake lift - 8.25mm lift Exhaust lift - 7.70mm lift Profile comparison photos:

Aug 7, 2023 · The 1.5-liter 16-valve Toyota 5E-FE engine was produced by the company from 1990 to 2003 and was installed on many popular models such as Tercel, Cynos, Corolla and Caldina. The sports version of the engine with evil camshafts and …

Jul 24, 2015 · You can get a set of 5E steel connecting rods from CX Racing for USD 289.00 plus shipping and you can have a machinist make the small end of these rods fully floating and your engine will be capable of more than 300WHP.

Nov 25, 2002 · 5E-FHE's are pretty hard to come by as they are quite rare. I normally ask around £ 400 for a secondhand engine with average miles, supplied with an ECU and fuel pump and a partial loom. You will find that most of the loom will be …