Mini-Circuits' RF low noise amplifiers (LNAs) are designed to provide low noise figure and are ideal for improving system noise figure in sensative receiver applications.

ultra-compact LNAs for VHF/UHF applications. These devices incorporate a br. adband LNA with an integrated bypass switch. The MAX2664 covers the UHF frequency range from 470MHz to 860MHz, and the MAX2665 covers . roved high-signal-level handling conditions. Additionally, the output port is internally matched to 50Ω while a single external indu.

LNA-3000-S581 Low Noise Amplifier Description Simplex, Half-Duplex, DAMA and IW signals (TDD) compatible Smart Booster for UHF applications. It substantially improves UHF Satcom downlink signals by an effective 7-15 dB, depending on the transceiver or radio used.

Jul 1, 2015 · The MAX2664 and MAX2665 are ultra-compact LNAs for VHF/UHF applications. These devices incorporate a broadband LNA with an integrated bypass switch. The MAX2664 covers the UHF frequency range from 470MHz to 860MHz, and the MAX2665 covers the VHF frequency range from 75MHz to 230MHz.

UHF Satcom Preamplifier, LNAU-0255-648, is an SDR front end LNA & Filter combined in a single device. It enhances UHF Satcom downlink signals.

AN26072A is LNA-IC for VHF and UHF Band (40 MHz to 900 MHz) Applications. Realizing high performance by using SiGe Bi-CMOS process (fT = 90 GHz, fmax = 140 GHz). High/Low Gain-mode is changeable, controlled by. 14.5 dB typ. fRX = 470 MHz (High-Gain mode / VCC = 1.8 V) integrated CMOS logic circuit.

UHF MUOS WCDMA Satcom Preamplifier and Filter, model LNAU-0370-648, is designed to cover the Downlink band of the new WCDMA MUOS payload. This Preamp was designed with Software Defined Receivers (SDRs) in mind, which are notorious for performing poorly absent prior signal conditioning.

UHF (70cm Band) L N A Low Noise Antenna pre-amp for SAT, EME & DX-ing. A Low Noise Antenna pre-amplifier (LNA) is a simple unit which offers spectacular improvement in the quality of receiving signal, especially when the signal is very weak and it comes from long distance.

C&T RF Antennas Inc provides the 380-480MHz UHF LNA Amplifier Low Noise Amplifier, and other frequency LNA amplifiers, power amplifiers. Contact us now.

Our VHF-UHF LNA design incorporates a L-C input circuit and a resistive loaded output circuit. During testing, the input circuit is optimized for selectivity, gain and noise figure. The resistive loaded output circuit, is adjusted to control the gain and is tested for a constant wide bandwidth output impedance. This resistive load