This document provides a method statement for installing stub angles in gantry tower foundations. It outlines responsibilities for various roles in the project manager, site manager, site …

This standard provides general recommendations for selecting methods and procedures that have been found practical for installing steel structure foundations with stub angles and anchor bolts …

Two rows of ground anchors are used at each wall to support the walls. The upper anchor has a total length of 14.5 m and an inclination of 33.7° (2:3). The lower anchor is 10 m long and is …

Jul 14, 2015 · 5.1 A stub setting template is a specific tool for a type, design & make of tower. It is a light rigid steel framework and is used to hold the tower stubs at the correct alignment and …

This document provides the method statement for setting stubs to support transmission line towers. It outlines the responsibilities, procedures, and safety measures for properly …

Nov 29, 2017 · The anchoring arrangement of transmission tower legs consisting of inclined angle (in the same slope as that of the tower leg) with bearing cleats at the end, all embedded in the …

This form of corrosion of stub angle just above the muffing or within the muffing is very common in saline areas. If this is not attended at proper time, the tower

Stub should be set in the manner so that distance between stubs, their alignment and slope are as per design and drawing. To achieve the following methods are generally followed: 1. A …

Jul 3, 2018 · The minimum distance between the lowest edge of the stubs angle and the bottom surface of concrete footings shall not be less than 100 mm or more than 150 mm in case of …

This document summarizes the design of a stub cleat for a 400/220 kV special tower type. The design uplift load is 695427 kg. The stub section is SL(H)250x250x35 with a depth below …