Socket 3 was a 237-pin zero insertion force (ZIF) 19×19 pin grid array (PGA) socket suitable for the 3.3 V and 5 V, 25–50 MHz Intel 486 SX, 486 DX, 486 DX2, 486 DX4, 486 OverDrive and Pentium OverDrive processors as well as AMD Am486, Am5x86 and Cyrix Cx5x86 processors.

Oct 12, 2022 · M.2 socket 3 likely refers to which M.2 slot on your motherboard, maybe your motherboard has a few M.2 slot. Please send your motherboard model.

Apr 29, 2020 · Socket 3 did not have more pins than needed. It was designed to support the Pentium OverDrive CPUs that Intel released in the mid-1990s. These CPUs could have up to 237 pins, while the Socket 3 allowed 238 pins.

Nov 12, 2024 · What is Socket 3? The Intel Socket 3 is a processor socket with 237-pin holes in 19 by 19 rows, and ran at 3.3v and 5v. The Socket 3 socket was compatible with the Intel 486SX, 486DX, 486DX2, 486DX4, and OverDrive processors. To the …

Sep 30, 2023 · it's the third m.2 socket. the manual will tell you what it can do and where to find it. Not sure why they've called it 3 as your board only has one M.2 slot, You can use any Gen 3.0 …

Socket 3 motherboards were one of the last motherboards that used upgradeable cache modules (later boards often used cache modules directly soldered to the motherboard, making an upgrade or replacement of defective modules virtually impossible).

M.2有两种传输协议：Socket 2和Socket 3（注意是协议，接口都长一样）前者支持SATA 或者PCI-EX2的SSD。 后者专为高速存储设计，只支持pciex4的SSD 。

Jul 1, 2022 · An M.2 SSD is “keyed” to prevent insertion of a card connector (male) to an incompatible socket (female) on the host. The M.2 specification identifies 12 key IDs on the module card and socket interface but M.2 SSDs typically use three common keys: B, M, and B+M

Steelman 3-Inch 6-Point Locknut Socket, 3/4-Inch Drive, Install and Remove Wheel Bearing Locknuts, Laser Etched, Powder-Coated Steel

Socket 3 es un zócalo de 237 pines (19x19) de tipo Fuerza de Inserción Baja (Low Insertion Force, LIF) / Fuerza de Inserción Nula (Zero Insertion Force, ZIF) PGA (19x19) adecuado para los procesadores compatibles Intel 80486 a 3.3V y 5V, cuyo FSB oscila entre los 16 y 50MHz.