The SIGA-CR Control Relay Module provides a Form “C” dry relay contact to control external appliances such as door closers, fans, dampers etc. This device does not provide supervision of the state of the relay contact. Instead, the on-board microprocessor ensures that the relay is in the proper ON/OFF state.

The SIGA-CR Control Relay Module is an addressable device that provides one Form C dry contact output relay. The relay contacts transfer when the module is activated. The module requires one address on the signaling line circuit (SLC). Addresses are assigned electronically. There are no address switches.

Standard-mount versions (SIGA-CR and SIGA-CRR) are installed to standard North American 1-gang electrical boxes, making them ideal for locations where only one module is required. Separate I/O and data loop connections are made to each module.

The SIGA-CR Control Relay allows users to control a variety of peripheral devices connected to the fire alarm system. This includes the activation of door holders, fans, alarms, and other connected systems, triggered by fire alarm signals.

Signature loop controller, the SIGA-CRR reverses the polarity of its 24 Vdc output, thus activating all Sounder Bases on the data loop. Standard-mount versions (SIGA-CR and SIGA-CRR) are installed to standard North American 1-gang electrical boxes, making them ideal for locations where only one module is re-quired.

The Edwards SIGA-CR is an intelligent, addressable control relay module designed to integrate seamlessly with Edwards’ Signature Series fire alarm systems. It provides a Form “C” dry relay contact, enabling the control of external devices such as door closers, fans, and dampers.

The Edwards SIGA-CR Control Relay provides a form “C” dry relay contact to control external devices such as door closers, fans, dampers, etc. This device does not monitor the state of the relay contact.

The SIGA-CR is an addressable device used to provide one Form C dry relay contact to control external appliances (door closers, fans, dampers, etc.) or equipment shutdown. The system firmware ensures that the relay is in the proper ON/OFF state. Upon command from the loop controller, the SIGA-CR relay energizes.

The Edwards / EST SIGA-CR Control Relay Module provides a Form “C” dry relay contact to control external appliances such as door closers, fans, dampers etc. This device does not provide supervision of the state of the relay contact.