TI’s SN74HC132 is a 4-ch, 4-input, 2V to 6V 5.2mA drive strength NAND gate with Schmitt-Trigger inputs. Find parameters, ordering and quality information.

The 74HC132 is identical in pinout to the LS132. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. The HC132 can be used to enhance noise immunity or to square up …

Logic Diagram (Positive Logic) for the SN74HC132. This device includes balanced CMOS push-pull outputs. The term "balanced" indicates that the device can sink and source similar currents. The drive capability of this device may create fast edges into light loads so routing and load conditions should be considered to prevent ringing.

The 74HC/HCT132 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT132 contain four 2-input NAND gates which accept standard input signals.

MM74HC132M – NAND Gate IC 4 Channel Schmitt Trigger 14-SOIC from onsemi. Pricing and Availability on millions of electronic components from Digi-Key Electronics.

High −Performance Silicon−Gate CMOS. The 74HC132 is identical in pinout to the LS132. The device inputs. are compatible with standard CMOS outputs; with pull −up resistors, they are compatible with LSTTL outputs. slowly changing waveforms. • Output Drive Capability: 10 LSTTL Loads. • Outputs Directly Interface to CMOS, NMOS, and TTL.

The 74HC132; 74HCT132 is a quad 2-input NAND gate with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of V CC. Schmitt trigger inputs transform slowly changing input signals into sharply defined jitter-free output signals.

The 74HC132; 74HCT132 is a quad 2-input NAND gate with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. Schmitt trigger inputs transform slowly changing input signals into sharply defined jitter-free output signals. Features and benefits.

The M74HC132 is a high-speed CMOS quad 2-input Schmitt NAND gate fabricated with silicon gate C2MOS technology. Pin configuration and function are identical to those of the M74HC00. The hysteresis characteristics (around 20 % VCC) of all inputs allow slowly changing input signals to be transformed into sharply defined jitter-free output signals.

The 74HC logic family is functionally and pinout compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground. See detailed ordering and shipping information on page 4 of this data sheet.