Dec 6, 2008 · Then I cut it up to illustrate the part that would be used for the offset antenna. The math all works out that (more or less) when you cut an offset out of a 0.3 F/D prime focus you …

This is offset degrees above the dish angle"A". The AZ_EL mounts, in an inverted installation, (page02) the scale may read offset degrees above what it is actually looking. This is the "A" …

(W) and depth (d) at the center of an offset dish, a problem arises. The depth measurements of offset A33 (alias) Calculation of the focal length of an offset satellite dish antenna, Revisited …

Dec 10, 2020 · To enable an easier method for experimenting with hitting different satellite orbitals, the offset dish mounting pole can be installed at the angle that corresponds to the …

Feb 8, 2007 · With the motorized dish pointed at 82, I moved around the LNB until I found the 91 bird at ~3-1/4" horizontal offset, and ~2" vertical offset. Note that the correction for this was …

Mar 11, 2009 · I'm assuming that you are using a fixed mount KU dish with an offset feed horn - something like a Primestar dish. For example - say, the satellite elevation is 40°. The dish …

At Solar Noon rotate the azimuth of the dish until the shadow of the LNBF falls on the centerline of the dish. Relationships: By measuring the dish bracket angle from plumb and subtracting the …

Jan 23, 2022 · (where "abs" means the 'absolute' value, and assuming the dish face of the offset dish is flat. The 'abs'-function is only needed for possible negative offset angles.) The …

Mar 21, 2012 · If you have a prime focus dish the dish should be offset at what dishpointer tells. If you have an offset dish, then the offset angle is either documented by mfg, or can be gleaned …

Mar 21, 2015 · A - Name of the dish; B - Horizontal size of the working area (This represents real size of dish- 1200mm means 1,2m dish); C - Vertical size of the working area; D - Depth of the …