This application note provides a Failure Modes and Effects Analysis (FMEA) for the device pins of the TPS386000-Q1 quad-supply voltage-supervisor device with programmable delay and watchdog timer.

in this document include the typical pin-by-pin failure scenarios: • Pin short-circuited to Ground (see Table 4-2) • Pin open-circuited (see Table 4-3) • Pin short-circuited to an adjacent pin (see Table 4-4) • Pin short-circuited to supply (see Table 4-5)

This chapter provides an FMEA (Failure Mode and Effect Analysis) for typical failure situations for the NX3P high-side load switch family. The failure occurs when the pins in the logic controlled power switch, are short circuited to supply IO, GND or neighboring pins or simply left open.

Jul 19, 2021 · This application note provides a Failure Modes and Effects Analysis (FMEA) for the device pins of the ISL3160E 5V, 40Mbps, full-duplex RS-485 transceiver. The failure conditions covered in this document include failure scenarios such as short-circuits to VCC, GND, and adjacent pins, and if the pin is left open.

INA240-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMEA (Rev. A) This document contains information for INA240-Q1 (TSSOP-8 and SOIC-8 packages) to aid in a functional safety system design. Information provided are: Figure 1 shows the device functional block diagram for reference. Figure 1. Functional Block Diagram.

4 Pin Failure Mode Analysis (Pin FMA) This section provides a failure mode analysis (FMA) for the pins of the TPS929240-Q1. The failure modes covered in this document include the typical pin-by-pin failure scenarios: • Pin short-circuited to ground (see Table 4-2) • …

This chapter provides an FMEA (Failure Mode and Effect Analysis) for typical failure situations, when the pins of bidirectional high-side power switch for charger and USB-OTG combined applications family are short circuited to supply IO, GND or neighbor pins or simply left open.

4 Pin Failure Mode Analysis (Pin FMA) This section provides a failure mode analysis (FMA) for the pins of the TPS784-Q1 ( VSON and SOT-23 packages). The failure modes covered in this document include the typical pin-by-pin failure scenarios: • Pin short-circuited to ground (see Table 4-2 , Table 4-6 , and Table 4-10 )

Oct 22, 2015 · In this application note, the HEF4000 pins are tested and analyzed under typical failure situations using the Failure Modes and Effects Analysis (FMEA). Pin FMEA. Some HEF4000 family devices have special functions, that can have different behaviors.

This application note provides a Failure Modes and Effects Analysis (FMEA) for the device pins of the TPS7B4250-Q1 Voltage-Tracking LDO Regulator. The failure conditions covered in this document include the typical pin-by-pin failure scenarios: Does the pin condition cause permanent damage? Is the device functional under the pin condition?