Applying new stucco to old and damaged stucco is perfectly acceptable, as long as the existing layer is stable enough. If ...

Be patient and properly slow-cure (moisture applied) the stucco. The scratch coat should be 3/8” thick, and it should cure for 48 hours before the brown coat is applied.

For stucco, though, the damaged surface needs to be prepared and stucco must be reapplied the same way it was initially done. To match color and texture, homeowners usually turn to repair services ...

The first coat of stucco is called the scratch coat. The plasterer will trowel a 3/8 -inch layer of stucco on the wall. Stucco is a mixture of Portland cement, lime, sand and water.

In other words, the stucco should extend into door or window moldings or frames to lock it in place. Second, make sure the bottom of the wall has a weep edge and is at least 6 inches above the soil.

For exterior stucco, the traditional application includes up to 4 layers — the dash (base) coat, scratch coat, brown coat, and finish coat — although newer methods require only 1 or 2 coats ...

Stucco usually has a textured surface, ... With all chemical applications, only do a section at a time so that the surface of the Stucco is not damaged. Most importantly, ...

The Nevada Supreme Court has rejected a request for class action status for claims of damaged stucco from faulty construction by Del Webb Communities involving nearly 1,000 Sun City Summerlin ...

It's no secret that stucco homes have had a ton of water problems during the last few decades. This all started here in Minnesota at the end of the 1980s, but it's not just a Minnesota thing.