The nails will get harder to driver the farther in they go, and if the wide side is perpendicular to the grain, it can split the wood apart. You’ll want to sink them in flush with the face of ...

Thoroughly clean the wood of any debris, dirt, or dust. Wood glue works best on the face grain or edge grain of the board.

On the other hand, if they were flat-sawn, exhibiting face grain, then they are more apt to cup. Vertical grain wood is more expensive than face grain. which explains why it is not used more often.

Charcuterie boards are typically made of face-grain wood, which is more delicate. When you look at a piece of lumber, the ...

Pocket holes are a form of wood joinery that secures screws through the edge or face grain of wood as opposed to the end grain, resulting in a much stronger joint. Building large boxes and ...

Face grain is when the boards used to make the butcher ... (Costs can skyrocket if you want a fancier, rarer wood, or can be even lower if you can manage a DIY install, of course.) ...

"When the wood starts to separate, like you’d see on a log in your fireplace, it's done. End grain burns slower than face grain, so pay particular attention to the sides of the piece as you go.” ...