Q: There’s a lot of contradictory advice on the internet about caulking. In particular, some sites are quite explicit that metal/wood junctions should not be caulked. I have a door-sized window ...

If not, use a utility knife to cut the tip off the caulking tube at a 45-degree angle. For fatter lines, cut the nozzle closer to the tube. Use the thin metal rod attached to the underside of the ...

Caulk is also useful due to its versatility ... the gap created when trim boards sit atop the siding, any wood to metal joints, weep holes on windows, and garage door panels.

If your caulking gun includes a nozzle cutter, use that. Use the thin metal rod attached to the caulking gun to pierce the inner seal through the nozzle. If there isn't a rod, a long thin nail ...

After caulking around the outside of the window ... while others have an attached metal or wood flange that must be secured with nails or screws. Also look for foam-filled tubular gaskets that ...

Q: I live in a two-story house that has T-111 plywood siding. As you know, this siding has a vertical groove every 8 inches. Across this siding I have a 2-by-12-inch board. My question is, should ...

Manufacturer introduces a new line of acrylic color caulk, with exact color matches to all of its 86 wall base colors. The sealant/adhesive caulk is developed for floor and wall base-finish touch-ups.

Based on what I’ve seen in my short time on this planet and what the sun’s powerful and unrelenting ultraviolet (UV) light can do to metal, I’d say that no caulk is going to last and last.

As you might have already encountered in the caulk aisle at your local home center, there's a dizzying array of caulking products in tubes, cartridges, and aerosol cans. All those choices could ...

We may earn commission if you buy from a link. Why Trust Us? Clean caulking comes down to three things: the position of the caulk gun, the speed that you move the gun and the opening that you cut ...